Many were surprised and asked, “why does my stove keep tripping the breaker?” Making a romantic lunch for your special someone while the burner keeps tripping the breaker is the worst thing that can happen.
It could be dangerous if your circuit breaker keeps tripping every time you use the stove, particularly if you reside in a recently constructed housing development.
Why does my stove keep tripping the breaker repeatedly, and how can it be fixed? Let’s see why your stove might be tripping the circuit breaker. After that, you can resume preparing that romantic meal for two.
Ready? Let’s dive in!
Damaged Wiring
You’ll see numerous cables going through your gas or electric stove.
Why it fails:
Even though they are hidden, your stove’s wires occasionally become hurt or break. Those wires may have been damaged by an impact or a strong surge that resulted in their burning or breaking.
How to fix:
It can take a while to fix damaged wiring. You must first cut off any gas or electric connections to the stove. Then, to access the stove’s interior, remove any required panels.
You can replace the wire, remove the damaged area, and reconnect the wires.
Terminal Block Connection Is Burnt.
The terminal block, to put it simply, is where the power supply cables from the socket and the supply cables leading to the several components of the stove connect.
Why it fails:
Sometimes, areas of the terminal block may experience burns, arcing, or heat damage. That might occur due to one of the exposed wires grounding out when it touches other metal components.
How to fix:
The user guide, technical sheet, or calling the manufacturer are the best options. In this manner, you’ll get a part that properly fits the brand and model of your stove.
But you must first cut the stove’s power and gas before doing anything (if it has one).
The stove Burner Switch Is Burnt.
They are variable switches that control how much power is sent to each burner based on how far the knob is turned.
Why it fails:
Bi-metal switches are also referred to as burner or endless switches. That indicates the switch itself undergoes a continuous heating and cooling process.
Unfortunately, if that heating and cooling process doesn’t go as it should, that might cause some issues. Usually, if an endless switch malfunction, the stove will either not heat up or remain stuck at its maximum heat output.
How to fix:
You must replace the damaged burner switch to operate the stove again without risk. You’ll need to locate the appropriate burner switch type for your stove model. To identify the proper replacement part, you can discover this information in the user manual, tech sheet, or by contacting the manufacturer.
Weak Breaker
As the name implies, a circuit breaker cuts off an electrical circuit when it detects danger. The term “sensing danger” refers to the breaker’s ability to recognize when a device—such as your stove—is consuming significantly more electricity than it should.
Why it fails:
If you’re using the stove normally and the breaker trips a short while later, your breaker may be the issue. The issue here is frequently that the breaker is too weak or small to handle the stove’s energy requirements.
How to fix:
Ensure your home has a breaker suitable for the stove you use to resolve this. For instance, even though your stove draws 41 amps, you might only have a 30 amp breaker. Then you should update to something like a 50 amp breaker instead if that’s the case.
It’s important to be able to prepare those special dinners for two occasionally. It’s important to understand the potential causes of your stove frequently tripping the breaker because our stoves are essential to our well-being at home.
You should now be able to determine why the circuit breaker on your stove has been acting up. The wiring of the stove, an endless faulty switch, dampness in the breaker panel, a broken or faulty outlet, or a weak breaker could all be the source of the issue.
But whenever you cannot do it alone, you may turn to Kenmore Best Appliance Repair Pro, for they’ve also been in the business for years providing exceptional Kenmore range repair in all local areas.
Work with Professionals Now!
You can check out some of our other helpful blog articles if you want more information. But whenever you need our professionals today, you can contact us and speak to our customer service representative. We’ll be more than glad to assist you.