There are different possible reasons for your gas oven not heating up. Most likely, one or many of its components are no longer in good condition, often requiring replacement. Although you use a gas oven, it will still need electricity. Learning the possible reasons for what has caused the issue can help you with what to do and how to prevent or fix the issue.
Before you start working on the appliance, always consider your safety. When working with a gas-powered appliance like an oven, always ensure that you have shut off the gas before attempting to repair it.
- No Electricity Supply – A gas oven uses natural gas as its main energy source, and also, at the same time, it will need 120V to start and run, such as the gas igniter, timer, and oven light. As such, if the gas oven doesn’t receive enough electricity, it won’t heat up even if you have set the temperature.
- No Gas Supply – Even if your gas oven receives enough electric current to power the igniter and its other components, your oven won’t heat if there is no gas supply coming to the appliance. The gas oven needs a consistent supply to start heating and power the oven cycle throughout the cooking time.
- Faulty Oven Igniter – When you turn on the gas oven, its igniter receives an electrical current. As the igniter heats up, its safety valve receives the signal and opens the gas to the oven’s broil or the bake tube to start the heating flame. If the igniter is faulty, it will either not heat.
- Malfunctioning Safety Valve – A malfunctioning safety valve isn’t common in gas oven problems. However, the bimetallic strip can sometimes be faulty and fail to open, which causes the gas not to go into the burner tube and the oven not to start heating. You can test the valve for its continuity and replace it if it malfunctions.
- Defective Thermostat – Your gas oven’s thermostat controls and monitors the oven’s temperature. If it is bad, it won’t communicate with the igniter, which means that the oven won’t be able to initiate the heating process.
Regardless of the type of oven or the brand used, like Kenmore, having a heating problem with the appliance often leads to different problems affecting your cooking routine. If you find any reasons mentioned with your Kenmore wall oven, consider calling Kenmore Best Appliance Repair Pro to assist you.
Defective parts can often cause the appliance not to heat up properly even if you have set the temperature. Proper troubleshooting using the right tools and equipment will help repair technicians execute proper Kenmore wall oven repair to find the main cause and apply the right solution to fix the problem.
How Do You Fix A Gas Oven That Won’t Heat Up
Here are things to do to fix the gas oven heating problems. Make sure to exercise safety precaution to prevent accidents.
Electricity Issue
Even if you use a gas oven, it will still need electricity to power up its parts, such as the igniter. Some possible causes of the electrical supply issues for your gas oven include the following:
- The Wall outlet switch is turned off
- Faulty wall outlet
- Damaged cord
- Tripped circuit breaker
To fix this, depending on the possible reason mentioned, you can do the following:
- Check the gas oven power outlet switch and turned on if it is off.
- If the switch is on, but no electric current is flowing, plug a different kitchen appliance into the small outlet.
- If the outlet isn’t the problem, assess the power, and check the power cord for damages.
- If the cord is intact, open the circuit breaker and check if the switch for the oven is tripped.
Gas Supply
There are two possible causes for the gas oven being unable to receive enough gas the turned-off gas valve or the home gas line isn’t receiving gas.
- If you suspect your gas supply valve is turned off, locate this and turn it back on.
- If the gas supply valve is turned on, but it is possible of a gas supply issue, contact your local gas supplier or a professional to fix it.
Faulty Igniter
To assess the igniter, you should be able to notice its glow. If it doesn’t, and the burner doesn’t turn on within 90 seconds, the igniter isn’t heating enough to signal the safety valve to open the gas. This is an indication of a faulty igniter that needs to be replaced. Another way to determine if the igniter is bad is to check its continuity using a multimeter. You can call Kenmore Best Appliance Repair Pro to properly assist you.
Problem With Safety Valve
The easiest way to tell if the safety valve of the gas oven is malfunctioning is to check the igniter to see if it is glowing. If this glows, but the burner doesn’t ignite after 3 minutes, the gas safety valve may malfunction and be unable to open to allow the gas flow to the burners.
Let a certified appliance repair company assist you in ensuring the safety and proper troubleshooting and repair of your gas oven. Kenmore Best Appliance Repair Pro has brought effective repairs like Kenmore range repair. We guarantee quick repairs and won’t compromise the quality of our work and the appliance’s functionality.
If you are experiencing problems with your Kenmore appliances, call Kenmore Best Appliance Repair Pro today to assist you quickly and to be able to cook properly delicious meals for your family using your Kenmore gas oven.