One of the most crucial home appliances you could have is a trustworthy washing machine. Laundry is a labor- and time-intensive task that becomes significantly more difficult without a washer. There are many features and advantages of washer, as well as a variety of brands to pick from.
There is no denying the most significant advantage of a fully automatic washer: It saves a ton of time compared to hand washing. Nothing else needs to be done besides placing your laundry in the washer, turning it on, and selecting a cycle.
One of those tasks is changing the washers or to replace a washer faucet. Additionally, learning how to fix a leaking laundry faucet on your own and unclog a toilet without a plunger will help you avoid problems of this nature.
There are a few easy steps you must take if you want to replace faucet washers on your own. Some household tasks need the expertise and experience of a professional for washer repair. Good news! Kenmore Best Appliance Repair Pro is the right company to call for Kenmore washer repair.
Five easy steps can save time if the plumber is not yet available
Turn Off The Water Supply
Under the faucet, there should be an isolation valve that can be used to shut off the water to that specific sink. Alternatively, shut off the water at the mains if you don’t have one of these. You must also turn off the boiler and immersion heater if you’re replacing the washer on the hot water faucet.
Insert The Drain Stopper
If you drop any screws or other components, you won’t lose them down the drain thanks to this. To prevent scratching the surface if you drop something, you can place an old towel inside the sink.
Remove the Cover from the Faucet
Carefully complete this using your screwdriver. The valve will become visible as a result, and the spanner can then be used to remove it. If it’s stiff, use a wrench, if you have one, to hold the faucet in place, but first cover it with a cloth to prevent damage. But if you want a professional to handle the replaced washer valve, call Kenmore Best Appliance Repair Pro.
Secure the Washer
A screw or nut is used to hold the washer in place, which is located underneath the valve. Use a spanner to remove the washer, or if it is too hard to undo, spray some WD-40 around it and give it time to absorb before attempting again.
Replace the Old Washer
Change the worn-out, old washer for a new one of the same size.
Put the Faucet Back Together Again
Reinstalling the valve requires careful attention to avoid damaging the faucet by over tightening it. You’re finished once you’ve secured the faucet’s top back on.
Turn the Water Back On
Pull the plug, take the towel out of the sink, and turn the water back on.
The washer is directed toward the seat when the faucet is turned on, applying pressure. In turn, this pushes water out the spout. The washer pushes up against the seat to form a watertight seal when the faucet is turned off, preventing any water from passing through.
You should replace a washer every one to two years because of their propensity for constant wear and tear. In need of washer faucet repair? Worry no more! Kenmore Best Appliance Repair Pro is your one-call-away contractor.
Five (5) Tips for Extending the Life of Your Washer
Although it might seem like your washer is nearing the end of its useful life, there are a few tricks and tips that could extend the lifespan of your washing machine by a few years. Here it is, the washer life-extension secrets our team has been working on for so long.
- Before adding a load, search the pockets for any loose objects that might clog the hoses in your washer, such as coins, keys, paper, hair clips, and so on. Furthermore, any audible buzzing or humming coming from your washer could be a sign that one of those pocket objects has lodged in the pump and become clogged.
- We’ve all engaged in it. We’re either too busy or forgot to transfer the load to the dryer after the washing cycle ended, the chime sounded, and you received a “complete cycle” notification. But did you know that leaving your laundry in the washer can make it the ideal environment for mold and mildew to grow and leave your washer smelling bad for a while? Even worse, once it’s established, it can be challenging to remove. Take your clothes out of the washer when the cycle is done to prevent this. If you have a front-loading washer, leave the door open so the drum can dry naturally.
- Avoid packing your washing machine too full. If there are too many clothes or bulky items in the same load, the washer may become out of balance and struggle to spin. If this is the problem, start the cycle again after evenly distributing the clothing.
- Regularly inspect the hoses for any bulges, cracks, frays, or leaks near the ends to be proactive with your washer maintenance. If there is a problem, replace the damaged hose as necessary. For washing machine maintenance, replace it every three to five years.
- Last but not least, make sure your washing machine is level as another maintenance task. During a spin cycle, an unbalanced washing machine can rock, shake, or even vibrate across your laundry room, harming both your machine and the floor. Therefore, to ensure that the legs of your washer are all the same height, check your owner’s manual for instructions on how to adjust the legs.
Have you spent hundreds of dollars to keep your washer in working order? Worry no more! Kenmore Best Appliance Repair Pro is available anytime. We have a licensed team of technicians who’ll restore or handle all your appliances needs, just like when you first purchased them.
If you are a homeowner, tenant, or property manager on the search for the most certified and dependable washer repair, look no further! Kenmore Best Appliance Repair Pro is your go-to solution!